Product Reviews

SmallRig Cage Kit 4336 Review: A6700 Protection and Rigging

A tailored option for Sony A6700 video shooters who want a protective cage, HDMI cable clamp, accessory mounts, and an integrated Arca-Swiss plate.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cage Kit review centers on a dedicated Sony A6700 cage that combines a cable clamp, multiple accessory mounts, and a quick-release plate in one compact rigging base.

It suits video creators who want to build out the camera while retaining access to its controls, ports, and battery door.

SmallRig Cage Kit Review Summary

The quick verdict

SmallRig Cage Kit 4336
4.8/5

800+ ratings

Read Amazon Reviews

SmallRig Cage Kit 4336

A tailored option for Sony A6700 video shooters who want a protective cage, HDMI cable clamp, accessory mounts, and an integrated Arca-Swiss plate.

  • Purpose-built for the Sony A6700; installation uses a 1/4-inch-20 screw and an M2.5 screw.
  • A contoured housing is designed to protect the camera while retaining access to ports, controls, and the battery door.
  • The battery-door area includes an additional hinge arm intended to improve grip comfort.
  • Mounting options include 1/4-inch-20 and 3/8-inch-16 threaded holes, a 3/8-inch-16 top locating hole, and a cold shoe for accessories such as microphones or LED lights.

Pros

  • Made for the Sony A6700, with a two-point attachment and access to key camera functions.
  • Combines multiple threaded mounting points and a cold shoe for building a video rig.

Consider before buying

  • The HDMI clamp and headphone jack cannot be used together as configured; using the headphone jack requires removing the clamp.
  • Installation requires removing the camera’s right-side strap ring, so check your preferred strap arrangement before fitting the cage.
Read the full review summary

The 4336 is designed specifically for the Sony A6700, with a close-fitting housing secured by a 1/4-inch-20 screw and an M2.5 screw.

Its hinge arm at the battery door follows the camera’s contour, with an ergonomic shape intended to make the grip more comfortable.

At 152 g, it adds a modest amount of hardware while providing several mounting options for a more customized setup.

Its strongest practical advantage is the combination of a dedicated HDMI cable clamp and a built-in Arca-Swiss quick-release plate.

The cage can support accessories through 1/4-inch-20 and 3/8-inch-16 threaded holes, a 3/8-inch-16 top locating hole, and a cold shoe.

It is a sensible fit for A6700 owners moving between handheld, tripod, and compatible DJI RS-series stabilizer setups, provided the headphone-jack access tradeoff works for their recording routine.

The buying factors

SmallRig Cage Kit Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

A6700-specific fit

Designed for this camera and secured at two points, with access maintained to ports, controls, and the battery door.

9/10

Accessory mounting

Offers 1/4-inch-20 and 3/8-inch-16 threaded holes, a top locating hole, and a cold shoe.

8/10

Cable management

Includes an HDMI clamp; using the camera’s headphone jack requires removing the clamp first.

8/10

Rig switching

The integrated Arca-Swiss plate is intended to ease transitions among tripods, stabilizers, and handheld use.

8/10

Grip design

A shaped hinge arm at the battery door is included to improve the camera’s grip feel.

7/10

Setup flexibility

Supports several rigging approaches, though the right-side strap ring must be removed before installation.

Key Features and Specifications of SmallRig Cage Kit

  • Purpose-built for the Sony A6700; installation uses a 1/4-inch-20 screw and an M2.5 screw.
  • A contoured housing is designed to protect the camera while retaining access to ports, controls, and the battery door.
  • The battery-door area includes an additional hinge arm intended to improve grip comfort.
  • Mounting options include 1/4-inch-20 and 3/8-inch-16 threaded holes, a 3/8-inch-16 top locating hole, and a cold shoe for accessories such as microphones or LED lights.
  • An included HDMI cable clamp is designed to secure the cable connection; it must be removed to use the headphone jack.
  • The integrated Arca-Swiss quick-release plate is designed for quick changes among tripods, stabilizers, and handheld operation, including DJI RS 2, RSC 2, RS 3, and RS 3 Pro setups.
  • The cage weighs 152 g. Remove the camera’s right-side strap ring before installation and follow the manual.

Pros and Cons of SmallRig Cage Kit

Pros

  • Made for the Sony A6700, with a two-point attachment and access to key camera functions.
  • Combines multiple threaded mounting points and a cold shoe for building a video rig.
  • Includes an HDMI cable clamp to help secure the connection during setup.
  • Built-in Arca-Swiss plate can simplify moving between compatible support systems.
  • The contoured battery-door hinge arm is designed with grip comfort in mind.

Consider before buying

  • The HDMI clamp and headphone jack cannot be used together as configured; using the headphone jack requires removing the clamp.
  • Installation requires removing the camera’s right-side strap ring, so check your preferred strap arrangement before fitting the cage.
  • The integrated Arca-Swiss plate is useful when it matches your supports; confirm your tripod or stabilizer’s quick-release system before relying on it.

Who Should Buy SmallRig Cage Kit?

Good fit

Choose the SmallRig Cage Kit 4336 if your Sony A6700 is becoming a video-focused setup and you want one base for attaching a microphone, light, handle, or other accessories.

Its mix of threaded holes, a locating point, and a cold shoe gives you several ways to configure a compact rig without making separate mounting hardware the center of the build.

It is especially worth considering if you often switch among handheld shooting, a tripod, and one of the listed DJI RS-series stabilizers.

The built-in Arca-Swiss plate is intended to make those transitions quicker, while the HDMI clamp offers a dedicated way to secure the cable connection.

Before buying, check that your existing supports use a compatible plate arrangement and that removing the right-side strap ring is acceptable for your setup.

The cage also makes sense for A6700 users who value access to the battery door and controls while adding a more substantial grip shape.

Since the design is camera-specific, it is a more targeted choice than a generic clamp or arm when your goal is to outfit this particular body.

Who should skip it

Skip this setup if you need to monitor audio through the headphone jack while keeping the HDMI clamp installed; the described arrangement requires removing the clamp to use that jack.

Consider another mounting approach if your routine depends on leaving the camera’s right-side strap ring in place, or if your tripod and stabilizer plates do not match the cage’s integrated Arca-Swiss design.

SmallRig Cage Kit: Fit, Mounting, and Workflow

A dedicated base for the A6700

The cage is shaped for the Sony A6700 and locks at the bottom and side with two different screws.

That design gives the camera a stable mounting foundation while keeping access to the listed ports, controls, and battery door.

The installation note about removing the right-side strap ring is an important setup check: plan how you will carry or strap the camera before mounting the cage.

Useful mounting choices for video builds

The combination of 1/4-inch-20 and 3/8-inch-16 threaded holes, a top locating hole, and a cold shoe supports a range of accessory layouts.

A microphone or LED light can go on the shoe, while threaded points can accommodate compatible handles or arms.

The practical benefit is flexibility when arranging a rig; buyers should still confirm that each accessory uses the relevant connection.

The cable clamp has a workflow tradeoff

An HDMI clamp can help keep the cable connection controlled as the camera moves, which may be useful in a rig with an external display or recording setup.

The explicit limitation is audio monitoring: using the headphone jack requires removing the clamp first.

If headphone monitoring is part of your regular setup, consider whether you can work without the clamp during those sessions or are comfortable changing the configuration.

A quick-release plate for changing setups

The integrated Arca-Swiss plate is meant to let the camera move among a compatible tripod, stabilizer, and handheld arrangement without attaching a separate plate.

The listed DJI RS 2, RSC 2, RS 3, and RS 3 Pro modes give buyers a clear compatibility starting point, but checking the exact support and release system you own remains sensible before choosing the cage.

Alternatives to SmallRig Cage Kit

Only one supplied alternative is a useful camera-cage comparison, and it is designed for older Sony camera bodies rather than the A6700.

Battery-focused alternative

SmallRig Cage for Sony A6400/A6100/A6300/A6500
4.8/5

800+ ratings

Read Amazon Reviews

SmallRig Cage for Sony A6400/A6100/A6300/A6500

Choose the 4336 for the A6700-specific fit and included HDMI clamp. Consider this older-model cage only if your camera is one of its listed compatible bodies and you prefer its ARRI locating points.

  • This separate cage is designed for the Sony A6400, A6100, A6300, and A6500.
  • It offers 1/4-inch and 3/8-inch mounting points, ARRI locating holes, and access to the battery and SD card slots; an HDMI cable clamp is optional.
  • The 4336 is made for the Sony A6700 and includes an HDMI clamp plus an integrated Arca-Swiss plate.

Is SmallRig Cage Kit Worth It?

The SmallRig Cage Kit 4336 is worth considering for Sony A6700 owners building a video rig around accessory mounting and quick changes between compatible supports.

Its combination of a tailored cage, HDMI clamp, multiple attachment points, and integrated Arca-Swiss plate addresses practical setup needs in one package.

Buy it if those features match your workflow and you are comfortable removing the clamp when using the headphone jack, as well as removing the right-side strap ring during installation.

Confirm the quick-release compatibility of your supports before choosing it.

Your review at a glance

SmallRig Cage Kit 4336
4.8/5

800+ ratings

Read Amazon Reviews

SmallRig Cage Kit 4336

A tailored option for Sony A6700 video shooters who want a protective cage, HDMI cable clamp, accessory mounts, and an integrated Arca-Swiss plate.

  • Purpose-built for the Sony A6700; installation uses a 1/4-inch-20 screw and an M2.5 screw.
  • A contoured housing is designed to protect the camera while retaining access to ports, controls, and the battery door.
  • The battery-door area includes an additional hinge arm intended to improve grip comfort.
  • Mounting options include 1/4-inch-20 and 3/8-inch-16 threaded holes, a 3/8-inch-16 top locating hole, and a cold shoe for accessories such as microphones or LED lights.

Written by

sevenstemsdesign.com Editorial Team

Editorial team

sevenstemsdesign.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cage Kit 4336

SmallRig Cage Kit 4336

A tailored option for Sony A6700 video shooters who want a protective cage, HDMI cable clamp, accessory mounts, and an integrated Arca-Swiss plate.

  • Purpose-built for the Sony A6700; installation uses a 1/4-inch-20 screw and an M2.5 screw.
  • A contoured housing is designed to protect the camera while retaining access to ports, controls, and the battery door.
Check Video Reviews on Amazon