Product Reviews

SmallRig 2905B Field Monitor Mount Review

A compact monitor mount for camera operators who want adjustable viewing angles and a cold shoe connection for a 5- or 7-inch monitor.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Field Monitor Mount Holder review centers on a compact mount for adding a 5- or 7-inch monitor to a camera cage or handle.

Its 180-degree tilt, 360-degree swivel, and thumb-adjusted tilt tension suit rigs where angle changes need to be quick.

SmallRig Monitor Mount Review Summary

The quick verdict

SmallRig 2905B Field Monitor Mount
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount

A compact monitor mount for camera operators who want adjustable viewing angles and a cold shoe connection for a 5- or 7-inch monitor.

  • Designed to support 5- and 7-inch camera monitors on a camera cage or handle via cold shoe.
  • Offers 180-degree tilt and 360-degree swivel for changing the monitor’s viewing position.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
  • Locating pins and a silicone pad are built into the top to help secure compatible monitors and protect against scratches and twisting.

Pros

  • Broad tilt and swivel adjustment in a compact mount.
  • Thumb-adjustable tilt tension supports quick angle changes.

Consider before buying

  • The specified load limit drops at shallower tilt positions, so the intended screen angle matters when choosing a monitor setup.
  • Swivel tension requires the supplied Allen wrench rather than thumb adjustment.
Read the full review summary

SmallRig’s 2905B combines a cold shoe base, a 1/4-20 threaded hole, and a top screw in a small 76 g package.

It offers two ways to attach the mount and a broad range of monitor positioning, with locating pins and a silicone pad intended to help secure and protect compatible monitors.

This design is best suited to a compact camera rig with a 5- or 7-inch monitor, microphone, or light.

The key buying consideration is load at the chosen angle: the stated limits vary with tilt, and the maker advises retightening the top knurled screw with the supplied Allen wrench.

The buying factors

SmallRig Monitor Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Angle adjustment

The mount combines 180-degree tilt with 360-degree swivel, covering a wide range of screen positions.

8/10

Tension control

Tilt tension can be adjusted by thumb; swivel tension uses the supplied Allen wrench.

8/10

Mounting options

A cold shoe base and a 1/4-20 threaded hole support different rig attachment setups.

8/10

Monitor security design

Locating pins and a silicone pad are designed to help limit monitor movement and surface scratching.

7/10

Load guidance

Angle-specific limits are provided, though buyers need to match their setup to the relevant tilt position.

9/10

Compactness

At 76 g with a folded size of 78 × 67 × 42 mm, it is suited to keeping a rig attachment small.

Key Features and Specifications of SmallRig Monitor Mount

  • Designed to support 5- and 7-inch camera monitors on a camera cage or handle via cold shoe.
  • Offers 180-degree tilt and 360-degree swivel for changing the monitor’s viewing position.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
  • Locating pins and a silicone pad are built into the top to help secure compatible monitors and protect against scratches and twisting.
  • The base has a cold shoe adapter and a 1/4-20 threaded hole; the top has a 1/4-20 screw for a monitor or other accessory.
  • Specified load limits vary by tilt angle: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.
  • The mount weighs 76 g and has a folded size of 78 × 67 × 42 mm.

Pros and Cons of SmallRig Monitor Mount

Pros

  • Broad tilt and swivel adjustment in a compact mount.
  • Thumb-adjustable tilt tension supports quick angle changes.
  • Cold shoe and threaded base options work with different rig configurations.
  • Locating pins and a silicone pad add monitor-contact features.

Consider before buying

  • The specified load limit drops at shallower tilt positions, so the intended screen angle matters when choosing a monitor setup.
  • Swivel tension requires the supplied Allen wrench rather than thumb adjustment.
  • The top knurled screw should be retightened with the Allen wrench for additional security, adding a setup check.

Who Should Buy SmallRig Monitor Mount?

Good fit

Consider the 2905B if your camera cage or handle has a compatible cold shoe and you want to angle a 5- or 7-inch monitor without adding a longer arm.

Tilt and swivel adjustment make it practical for positioning the screen around a compact rig, while the thumbscrew lets you change tilt tension by hand.

It may also suit a lightweight microphone or light attachment through the top 1/4-20 screw.

Before buying, compare your device and planned angle with the stated load limits, confirm the base connection fits your rig, and keep the Allen wrench available for swivel tension and screw tightening.

Who should skip it

Skip this style if your setup requires a mount with a long reach or a clamp around a rod, tube, or table edge; the 2905B is designed around a cold shoe or threaded base connection.

Also look elsewhere if your monitor’s weight and planned tilt exceed the corresponding stated limit.

How the SmallRig Monitor Mount Fits a Camera Rig

Angle range and on-set adjustment

With 180 degrees of tilt and 360 degrees of swivel, the mount can orient a screen for more than one viewing position.

Tilt tension uses a thumb screw, while swivel tension takes the Allen wrench; that distinction matters if you routinely adjust both axes during a shoot.

Match load to the viewing angle

The specified limits differ by tilt: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees.

Use the limit for the position you plan to hold, and allow for the monitor and any attached accessories when checking the setup.

Attachment and monitor contact

The cold shoe base is intended for a compatible cage or handle, while the 1/4-20 threaded hole offers another connection route, such as a magic arm or stabilizer.

At the top, locating pins and a silicone pad are intended to help resist monitor twisting and scratching; check that the monitor’s mounting point aligns with this arrangement.

Alternatives to SmallRig Monitor Mount

Camera Mounts & Clamps alternative

SmallRig 6313 Camera Monitor Mount
4.7/5

800+ ratings

Read Amazon Reviews

SmallRig 6313 Camera Monitor Mount

Compare the 6313 if portrait as well as landscape monitor mounting is central to your rig; choose between their top mounting arrangements based on your monitor and desired orientation.

  • The 6313 has a retractable 1/4-20 locating screw, supports horizontal and vertical monitor installation, and also offers 180-degree tilt and 360-degree pan.
  • The 2905B uses locating pins and a 1/4-20 top screw and is described for 5- and 7-inch monitors.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Articulating Magic Arm 2066B
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Articulating Magic Arm 2066B

Consider the 2066B when you need an extended arm position and your accessory is within its listed weight recommendation.

The 2905B is the more direct fit for a cold shoe monitor setup where compact size and the specified angle range suit your rig.

  • The 2066B is a 9.8-inch articulating arm with 1/4-inch screws at both ends and a double ball-head design; its listed maximum weight recommendation is 213 g.
  • The 2905B is a compact monitor holder with a cold shoe base and angle-specific load limits.

Is SmallRig Monitor Mount Worth It?

The SmallRig 2905B Field Monitor Mount is worth considering for a compact camera rig that needs flexible monitor positioning and a cold shoe connection.

Its adjustment range, thumb-controlled tilt tension, and monitor-contact features make it a focused option for mounting a small screen or compatible accessory.

Check your base connection and the angle-specific load limit before choosing it, and expect to use the Allen wrench for swivel tension and added screw tightening.

If your setup needs a longer reach or a different monitor orientation arrangement, compare the alternative designs before settling on this holder.

Your review at a glance

SmallRig 2905B Field Monitor Mount
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig 2905B Field Monitor Mount

A compact monitor mount for camera operators who want adjustable viewing angles and a cold shoe connection for a 5- or 7-inch monitor.

  • Designed to support 5- and 7-inch camera monitors on a camera cage or handle via cold shoe.
  • Offers 180-degree tilt and 360-degree swivel for changing the monitor’s viewing position.
  • Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
  • Locating pins and a silicone pad are built into the top to help secure compatible monitors and protect against scratches and twisting.

Written by

sevenstemsdesign.com Editorial Team

Editorial team

sevenstemsdesign.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 2905B Field Monitor Mount

SmallRig 2905B Field Monitor Mount

A compact monitor mount for camera operators who want adjustable viewing angles and a cold shoe connection for a 5- or 7-inch monitor.

  • Designed to support 5- and 7-inch camera monitors on a camera cage or handle via cold shoe.
  • Offers 180-degree tilt and 360-degree swivel for changing the monitor’s viewing position.
Check Video Reviews on Amazon